Close
     FAQs

  Question: Hard reset for MiVue 700/800 Series
  Answer:
 

MiVue735: Insert a small rod (such as a straightened paperclip) into the Shutdown button beside the barcode ( the camera) to shut down the device. Leave the device off for 5 seconds then press and hold the power button to turn it on.

MiVue740/745/750: Insert a small rod (such as a straightened paperclip) into the Shutdown button beside the barcode ( the camera) to shut down the device. Leave the device off for 5 seconds then press and hold the power button to turn it on.

MiVue760/840 DC: Insert a small rod (such as a straightened paperclip) into the Shutdown button beside the barcode ( the camera) to shut down the device. Leave the device off for 5 seconds then press and hold the power button to turn it on.


MiVue820: Insert a small rod (such as a straightened paperclip) into the Shutdown button beside the barcode ( the camera) to shut down the device. Leave the device off for 5 seconds then press and hold the power button to turn it on.



MiVue700/710/730: Insert a small rod (such as a straightened paperclip) into the Shutdown button beside the barcode ( the camera) to shut down the device. Leave the device off for 5 seconds then press and hold the power button to turn it on.



 

MiVue780/800 and 850 Dual: Insert a small rod (such as a straightened paperclip) into the Shutdown button

beside the USB port (on the top of the device) to shut down the device. Leave the device off for 5 seconds

then press and hold the Power button to turn it on.


MiVue790/860 DUAL: Insert a small rod (such as a straightened paperclip) into the Shutdown button beside the USB port (on the top of the device) to shut down the device. Leave the device off for 5 seconds then press and hold the Power button to turn it on.



 
  Rate this FAQ Average Rating: 0.00/5 (0  votes)
Not Helpful<<    >> Very Helpful
   
Submit Vote
Close